Film
Feeders
Easily adapted to any make or model of Ultrasonic Welder!
- Eliminates part marking and scuffing from the ultrasonic welding process
- Attaches to any make or model of Ultrasonic welder by simply bolting it to the base plate
- Servo Motors
- Available with activation switch or automatic interface cable for 800 series welders
- Solid state electronic design
For 900 & 2000 Branson and Dukane's:
- Spring loaded Film Guides
- Automatic take up
- Adjustable in the z axis to accommodate any fixture/part height
- Index is controlled with digital timer
- Film available in 3" or 6" wide tube, or use your own
|
Technical
Data
|
|
| Model | Type 2400 |
| Mains Supply | 3 x 380 V, 50/60 Hz |
| Power Requirements | 8 kVA / 12 A |
| Operational Frequency | 240 Hz |
| Amplitude | 0.35 - 0.9 mm |
| Pressure, adjustable | 100 - 500 daN |
| Air consumption (at 6 bar and maximum stroke of 300 mm) | 0.0255 Ncum/stroke |
| Maximum Welding Area | 580 x 350 mm |
| Upper edge of lifting table (when lowered) | 1050 mm |
| Clear height (upper edge of lifting table - lower edge of vibrating head) | 300 mm |
| Maximum stroke of lifting table | 300 mm |
| Maximum speed of lifting table | 0.15 m/sec |
| Weight of upper tool | 5.5 + kg |
| Machine dimensions |
w = 1060 mm |
| Total Weight | 920 kg |
Sonic
& Thermal Technologies, Inc.
84 Research Drive
Milford, CT 06460
Tel: (203) 878-9321 Fax: (203) 878-6786
Call
Toll Free
1-800-875-4676
Home l I Ultrasonics I Heat Staking I Leasing Info
